Write a Review
Get Paid!

Delta_BC30_30_Inch_Commercial_Biesemeyer_Table_Saw_Fence
Technical Details
30-inch Biesemeyer Table Saw Fence increases saw work accuracy and precision
Three point locking system and hairline pointer is accurate to within 1/64 of an inch
Steel tape is built in eliminating the need for hand-held tape
Fence body glides smoothly
Finland birch construction

Product Description
The DELTA BC30 30-inch Commercial Biesemeyer Table Saw Fence features a three-point locking system and hairline pointer that lets you do precise table saw work to within 1/64 of an inch. This commercial 30-inch Biesemeyer Table Saw Fence can be mounted on almost any table saw. It has a built-in steel tape. The fence body glides easily and can rip to either side of the blade, making it great for repetitive cut-off work, precise ripping, and squaring cuts. It has a built-in steel tape, and is built out of nine-ply Finland birch with high-impact laminates and fit to solid steel tubing for durability.

Vega_PRO_40_Table_Saw_Fence_System_With_42-Inch_Fence_Bar
Technical Details
Uses existing hole pattern for Delta Unisaw, Contractor, Powermatic 66, Sears 10-inch saws
40-inch right and 10-inch left of blade
Fence mounting system allows full adjustment for accuracy
Micro adjustment and aux table support
Guide rails supported by brackets, 2-1/2-inch fence height

Product Description
Upgrade your saw to a precise cutting machine at a reasonable price with the Vega PRO 40 Table Saw Fence System. It was specially designed to use the existing bolt holes (no drilling required) of Delta Unisaws and Contractors Saws, Powermatic Model 66 and most Sears 10 in. saws. Little accuracy is needed as the fence mounting system allows full adjustment. Installation may be as little as 15-minutes. (Includes 42-Inch Fence Bar, 40-Inch to Right)

Freud_SD208_8-Inch_Professional_Dado
Technical Details
Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
The negative hook angles make flat bottom grooves and virtually splinter-free cuts
Slot widths from 1/4-inch to 13/16-inch in 1/16-inch increments
Set includes two outer blades and 3 two wing chippers (3- 1/8" chippers & 3- 1/16" spacers)
Includes shim set for micro adjustments

Product Details
Clean edges, square shoulders, and flat bottoms: the Freud SD208 Eight-Inch Professional Dado Set cuts with ultimate precision, so you can achieve them all. This is your go-to set for efficiently creating dadoes and grooves in a wide range of materials from hardwood to laminate. Boasting thick MicroGrain carbide tips and an anti-kickback design, the set's two outside blades can be resharpened for long-term accuracy. For added versatility, the kit cuts grooves spanning 1/4 to 7/8 inch and includes a shim set.

Resharpening Blades for Smooth, Splinter-Free Dadoes
The perfect dado set for the fine cabinetmaker or weekend woodworker, the Freud SD208 produces dadoes and grooves that meet with flush, even edges. So you can be assured of precise cuts every time, the set is equipped with precision-grade features, starting with two proprietary outside blades that can be resharpened to deliver accuracy for the long term.

These high-quality eight-inch, 12-tooth blades with 5/8-inch arbors cut dadoes and grooves that are clean, flat, and virtually splinter free. Cuts made by these blades are accurate the first time, saving you from making repeated passes over the same workpiece.

Flexibility for Cutting Hardwoods, Laminates, and More
The Freud SD208 accommodates a wide range of materials, so you can use it from project to project. And because it requires less power to feed, it is ideal for use with underpowered saws. Use it to create dadoes and grooves in hardwood, softwood, chip board, plywood, and laminate (not recommended for non-ferrous materials).

Two-Wing Chippers, Spacers, and Shim Set for Fine Adjustments
The set's included chippers/spacers (three 1/8-inch chippers and three 1/16-inch spacers) save you time and energy. With their two-wing design, they efficiently remove waste material and smooth the edges of your workpiece. Plus, they allow you to fine-tune your cuts from 1/4 to 7/8 inch, so you have accurate control over the desired width.

And with the Freud SD208's included shim set, you never have to give up making dadoes with a workpiece that's too thin to fit the width of your dado blades. This handy shim set expands the range of your kerf adjustments, giving you even greater control for achieving a flawless finished workpiece.

Anti-Kickback Design for Safe Operation
The quality of this dado set is enhanced by its anti-kickback design, which gives you an added margin of safety while you work.

MicroGrain Carbide Tips for Long-Lasting Performance
So you can get maximum performance out of this set, the blade components are constructed with Freud's TiCo Hi-Density Carbide. This means the blades can withstand numerous sharpenings and still retain their precision. And a Tri-metal Brazing process gives the blades impact resistance, so they last for the long term without dulling (a condition that can cause torn wood and uneven cuts).

Incra_LS17SYS_17_Inch_Range_Positioner_with_Pro-II_Joinery_Fence_System
Product Description
All of INCRA's new lineup of heavy duty router table tops, including the one in the RT Combo#1, feature a 1-1/4" MDF substrate with a high pressure horizontal grade phenolic laminate top and bottom. With a total thickness of 1-3/8", these tops are designed to support even the heaviest of production routers and lifts, and will work with any standard 9-1/4" x 11-3/4" mounting plate.

Rather than the typical router plate leveling set screws that dig into the table's recess requiring constant re-adjustment, Incra's plate leveling system puts flat head levelers in the table, not in the router mounting plate. Access to these levelers is through the 10 access holes located around the perimeter of the mounting plate. Just insert the hex key in the access holes and turn to adjust. After leveling, a simple quarter turn of the corner mounted Cam-Lock securely holds the plate in the router table's recess.

All INCRA router tables are shipped with a 3/8" solid aluminum router mounting plate featuring the exclusive Magna-Lock magnetic throat plate system.

Changing any of the included throat plates is a snap with the Magna Lock System. Just drop in the selected plate. The high energy, rare-earth magnets hold the plate secure and perfectly flush every time. All of the mounting plates include 3 laser cut throat plates with a 1", 2-1/8" and 3-5/8" opening. Includes: 17" Range INCRA LS17 Positioner Pro-II Joinery Fence INCRA Shop Stop INCRA JUMBO Right Angle Fixture 24" x 36" Offset Router Table Top 36" Router Table Stand Solid Aluminum MagnaLOCK Plate (3) MagnaLOCK Ring Inserts - 1", 2-1/8", 3-5/8" Master Reference Guide 51-Piece Template Library All Instruction Manuals 82-Minute Instructional DVD

LS32-TS_Incra_32_Inch_Table_Saw_Fence
Technical Details
Incrementally positioned carriage provides accuracy to .002" and perfect repeatability
Five sliding scale template channels
Easy On, Easy Off for cross-cutting operations and remounts in less than 10 seconds.
Fence glides eliminate all fence to table contact for a velvet smooth slide to your next cut
Universal mounting brackets virtually guarantee compatibility with any 10" table saw, with no drilling, tapping or modifications.

Product Description
The INCRA TS-LS offers the one thing that every table saw fence should have, but none of them do, namely, Automatic Positioning Control. All other table saws depend on a tape measure and your eyesight to position your work. That's why all table saw users are resigned to the fact that a good cut requires long set-up times and endless trial and error. The INCRA TS-LS completely eliminates the need for these tedious processes by using INCRA'S patented lead screw technology to position your work instantly and automatically to within 0.002". Even better, if you want to repeat a cut, you can return to any former position in less than 5 seconds with ZERO repeatability error. This kind of accuracy and perfect repeatability are luxuries that woodworkers could only dream about before the INCRA TS-LS. And because of its structural design, centrally placed carriage, and optimized side mounted clamping system, the entire unit virtually welds itself together into one solid block of steel and aluminum when locked in place. The result is exceptional strength, rigidity and stability. INCRA TS-LS Table Saw Fence - 32" Range (LS32-TS) consisting of: - TS-IIIAMOUNT - Base Mount Unit and TS-IIIA Rip Fence - RAIL72 - 72” Rails - PAIR - LS32 - INCRA LS 32” Range Positioner - Positioning accuracy: .002" over full range - Repeatability: Return to any former position in less than 5 seconds with ZERO repeatability error

Forrest_WW10407125_Woodworker_II_10-Inch_40_Tooth_ATB_.125_Kerf_Saw_Blade_with_Five_Eighths-Inch_Arbor
Technical Details
This kerf saw saves 1/3 on wood loss for each cut
Feeds easily when used for moderate rips and crosscuts on a table saw
Reduces jump in for better pull control
Eliminates bottom splintering on radial crosscuts
The new 30-degree ATB tooth style stops the blade totally


Product Description
With this all purpose blade for table saws you can rip and crosscut 1" 2" rockhards and softwoods resulting in a smooth as sanded surface. With 20° face hook, ply veneers will crosscut with no bottom splinter at moderate feed rates. Double hard and 40% stronger C4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut), second-step finishing and cutting 1/16" oversize to allow for resurfacing. Buy and sharpen one blade instead of 3 (24T rip, 50T combination and 80T crosscut).

Oshlun_SDS-0842_8-Inch_42-tooth_Stack_Dado_Set_with_Five_Eighths-Inch_Arbor
Technical Details
Professional grade C-4 carbide
Full body chippers
Precision ground carbide tips
Full color storage case
Shim set for fine adjustments

Product Description
This 16 piece stacked dado set is perfect for woodworker's who want a premium cut at an affordable price. Our woodworkers were amazed with the smooth, flat bottomed cuts from 1/4" to 29/32" wide. The precision ground C4 micro grain tungsten carbide tips cut through all types of hardwood, softwood and plywood with the greatest of ease - and stays sharp longer. Each set includes detailed setup instructions and an 8 piece shim set for fine adjustment. Includes two 42 tooth saws and six full body, 6 tooth chippers. 5/8" arbor.

MicroLux_Mini_Tilt_Arbor_Table_Saw
Technical Details
High torque, electronically rectified DC motor produces more torque and power than many motors rated at 1/2 hp and higher. And torque remains high, even at low rpm.
Variable speed, from 3,600 to 7,000 rpm. Lets you cut plastic, aluminum, brass and other non-ferrous metals without overheating.
Tilting arbor for angle cuts up to 45 degrees.
Cuts a full 1 inch at 90 degrees, 3/4 inch at 45 degrees.
Blade height adjusts from 0 to 1 inch.
11-1/2 inch x 9-1/2 inch table with 9-1/2 inch x 9-1/2 inch machined aluminum surface.
Two miter gauge slots for cutting from left or right side of blade.
Ball bearing spindle.
No-slip timing belt for more torque.
Vacuum cleaner attachment.
Up-front controls for on/off, speed, blade height and tilt.
Table extension for cross-cutting long sheet stock.
Plugs into standard 110v AC outlet.
Compact size. Only 10 inches long x 11-1/2 inches wide x 7 inches high. Weighs approx. 11 lbs.

Proxxon_38070_FKSE_Table_Saw
Technical Details
Unit includes vacuum cleaner adapter
110-115V, 60HZ; weight 11.5 lbs.
Replacement blades available 28731 crosscut, 28732 36 tooth carbide, 28734 24 tooth carbide, 28735 diamond coated blade, 28736 dado head set

Product Description
The Proxxon 38070 FKS/E Table Saw is the ideal machine for model building, picture framing, dollhouses, birdhouses and other intricate projects. Great machine for straight, miter, and compound cuts. Useable on all wood types, non-ferrous metals, plastics, as well as rubber, cork and other soft materials. Compact size makes the saw ideal for model builders, toy makers, architects, cabinet makers. Even the smallest items can be cut so cleanly that little or no finishing is required. Very sturdy construction with load bearing parts made of die cast aluminum. The machined aluminum work table measures 11-1/2 inches x 9-1/2 inches. 2 miter gauge slots are provided as well as miter gauge and fence. An extension wing is housed integrally and pulled out easily to increase the table width to 19-5/8 inches. Has very quiet DC moor and on Optibelt toothed belt producing high torque. the electronic speed control offers speeds of 4400-6800 rpm so you can cut even the most delicate materials without overheating them. The blade arbor has ball bearings and is fitted with a 3-5/32 inch diameter, 13/32 inch 24 tooth carbide tipped blade. Machine cuts 1 inch at 90° and 3/4 inch for 45° miters. Blade height is adjustable for 1/32 inch to 1 inch

4_Inch_Mini_Table_Saw_-_Hobby_Crafts
Technical Details
Max Cut: 90º: 3/4"
Blade Capacity: 4" Inch
Motor: 0.9 amps @ 110V 60Hz, 4500RPM
Table: 7-1/2" x 5 -1/2 x 6-1/2
Content: Table Saw, 1 x 4" 24 tooth Carbide Tip Blade & 1 x 4" Diamond Blade

Tradesman_8030_Bench_Top_Table_Saw
Blade diameter: 10 inch
Table dimensions: 26" x 17"
Weight: 38 Lbs

Shop_Fox_W1748_Hybrid_Table_Saw

Technical Details
Motor: 2 HP, 110V/220V, single-phase, pre-wired 110V
Left tilting blade
Precision ground cast iron table w/ wings: 39-1/2"W x 27"D
Capacity @ 90: 3"
Capacity @ 45: 2-1/8"

Product Description
The Model W1748 is a cross between heavy-duty cabinet saws and contractor-style table saws. The motor has been moved inside the cabinet stand and this saw is packed with features designed to increase performance and safety: Shop Fox® Aluma-Classic® Fence, left tilting blade, standard and dado inserts, splitter with clear blade guard, precision cast iron miter gauge and nearly 300 pounds of vibration dampening mass. The list of standard equipment keeps going: a 4"dust port, precision-ground cast iron table and handwheels, 2 HP motor, enclosed cabinet and magnetic switch with thermal overload protection.

Shop_Fox_W1711_Cabinet_Table_Saw
Technical Details
Motor: 5 HP, 28A, single-phase, 220V
Table size: 40-1/8" x 27" with wings (included)
Drive: Triple belt
Miter gauge: Heavy-duty cast-iron includes patented adjustable miter bar
Arbor: 5/8" (can accept up to 13/16" Dado set as well)

Product Description
10" 5hp Left Tilt Table Saw With a left tilting blade and nearly 550 pounds of vibration dampening mass, this saw will definitely take center stage in any shop. Includes two large cast iron wings, a jumbo miter gauge with a patented adjustment feature, and a powerful 5 H.P. motor with triple belt drive system. Motor: 5 H.P., Single-Phase, 220V Drive: Triple Belt Table Size: 40-1/8" x 27" with wings (included) Table: Precision ground cast iron with T-Slots Arbor: 5/8" (can accept Dado set as well) Table Saw Inserts: Two included (Standard and Dado) Miter Gauge: Heavy-Duty cast-iron includes patented adjustable miter bar. Switch: Heavy-Duty Magnetic Max. Blade Height: 3" Ripping Capacity with Standard Rails: 26" (Optional long rails available) Blade Tilt: Left (away from fence) Handwheels: Extra Large Cast Iron Fence: SHOP FOX® Classic Power Cord Size: 10' x 12 Gauge Guard: Clear plastic Sealed Ball bearing construction Motor cover and dust port included Powder coated paint Shown with OPTIONAL D2057 Adjustable Mobile Base.

Shop_Fox_W1677_Cabinet_Table_Saw

Technical Details
Handwheels: Extra large cast iron
Fence: SHOP FOX Classic
Sealed ball bearing construction
Powder coated paint
Guard: Clear plastic

Product Description
Motor: 3 HP, 18A, single-phase, 220V Drive: Triple belt Table size: 40-1/8" x 27" with wings (included) Table: Precision ground cast iron with T-Slots Arbor: 5/8" (can accept up to 13/16" Dado set as well) Miter gauge: Heavy-duty cast-iron includes patented adjustable miter bar Switch: Heavy-duty magnetic Maximum blade height: 3" Ripping capacity with standard rails: 26" Blade tilt: Left (away from fence)

Sawstop_PCS31230__TGP52_Professional_Cabinet_Saw
Technical Details
High quality Professional T-Glide fence system and gas assisted elevation system
SawStop's patented safety system which stops the blade within 5 milliseconds of detecting contact with skin
Superior dust collection that collects up to 99.5% of particulates, keeping dust from your lungs
Tool-free quick-change insert and blade guard making it easy to open the insert and switch between the blade guard and riving knife.

Product Description
In addition to the PCS31230 base unit, this SawStop Professional Cabinet Saw includes the 52-inch Professional T-Glide Fence System and 52-inch table.
The SawStop Professional Cabinet Saw is designed to perform in high use facilities including commercial shops and schools.
Powerful 3 HP motor, the PCS delivers high levels of power and can be plugged in to a standard 230-volt outlet.
Hammers are for driving nails, not adjusting saws. Discrete adjustment points throughout allow you to make precise blade-to-table and trunnion-to-table alignments using a hex wrench rather than brute force.
Engineered for the automotive industry, the long-lasting Poly-V ribbed belt can run continuously while delivering greater power transfer and reduced vibration to the blade for better cuts.
The elevation and tilt mechanisms use self-cleaning teeth to keep debris free from key internal mechanisms.
Powder-coated cabinet resists rust and corrosion ensuring stability and reliability for years to come.
Massive 62mm main arbor bearing delivers long lasting performance. The largest bearing ever used in a 10” cabinet saw provides you with smoother performance and longer life.
Extension table legs bolt to the rails rather than the table reducing the risk of damage to the table during movement.

Sawstop_CNS175_Contractor_Table_Saw
Technical Details
Table Saw Type:      Hybrid
Operating Voltage:     Manual Adjusting Power Supply 110v-230v 50/60hz
Power Used (Amps):     15 @ 110v
Horsepower (HP):     1.75 HP
Blade Size:     10-inch
Tilt Direction: Left
Fence Length:     52-Inch


Product Description
The SawStop CNS175-TGP52 Contractor Saw package features a 52-Inch Professional T-Glide Fence System with table, 1.75 HP motor and of course, SawStop's famous safety mechanism.

The SawStop safety system detects when someone accidentally contacts the spinning saw blade, and then stops the blade in milliseconds. In most cases, such an accident would result in just a nick on a SawStop contractor saw, instead of the devastating injury which would likely occur on an ordinary table saw. Not only are SawStop Contractor Table Saws the safest table saws on the market, they are also exceptionally high quality machines that are consistently ranked at the top of their class.

The SawStop contractor saw was designed to be the best you can buy, with a massive 62 mm main bearing, heavy-duty arbor shaft, cast iron trunnions and arbor block, solid cast iron table with removable extension wings, dust-collecting blade shroud, and a 1¾ horsepower motor -- and of course SawStop's revolutionary contact detection and brake system.

SawStop_ICS31230_Industrial_Cabinet_Saw
Technical Details
Table Saw Type:      Cabinet
Operating Voltage:     220 volt / 230 volt 60hz
Horsepower (HP):     3 HP
Blade Size:     10-inch
Tilt Direction:     Left
Fence Length:     Fence Sold Separately
Arbor Size:     5/8-inch

Product Description
SawStop price includes freight charges within the state of Colorado for all in-stock saws.SawStop has designed the SawStop ICS31230 10-Inch Industrial Cabinet Saw saw to be the highest-quality, yet safest table saw on the market. The SawStop ICS31230 cabinet saw has all the features you expect in a cabinet saw including enclosed cabinet, heavy-duty belt drive, cast iron trunnions, and three or five horsepower motors. In addition, the SawStop cabinet saw has a main bearing 50% larger than the Delta Unisaw, a European-style riving knife for improved kick-back prevention, and of course SawStops revolutionary contact detection and brake system.

Rockwell_RK72401_13_Amp_10-Inch_Table_Saw_with_Stand
Technical Details
Lightweight and easy to transport
Large safety on/off switch for enhanced control and operator safety
Reinforced cast aluminum table top for greater stability and precision
Quick Lock rip fence for quick and easy use with larger stock pieces
Integrated dust collection port for easy vac attachment

Product Description
The ShopSeries™ 13A, 10" benchtop table saw is a sturdy, lightweight machine which is ideal for any home or workshop and weighs less than 35 lbs. It has a powerful 13 amp motor with a large all cast aluminum table-top offering over 400 sq inches of work space and comes with a stand. Add-on features include a quick-release rip fence, safety on-off switch, large dust-free table top and easy blade adjustment. This table saw comes equipped with a 10 inch, thin kerf tungsten carbide blade, bevels to 45 degress and can cut up to 3" at 90° and 2-1/2" at 45°. It inlcudes a blade wrench, rip fence, miter gauge and push stick.

Rockwell-RK7140-1-13-Amp-Table-Saw_
Technical Specifications:
10-inch Table Saw
Power 13 Amps Motor
Aluminum Main Table
Quick Release Rip Fence
0-45 Degree Blade Bevel
Overload Protection
Adjustable Cutting Depth
Table Size 26” x 16”
Max cutting depth at 90 degree, 3"
Max cutting depth at 45 degree, 2-1/2"

Product Description:
Rockwell RK7140.1 13 Amp 10-Inch Table saw is a sturdy, lightweight machine which is ideal for any home or workshop and weighs less than 35 lbs. It has a powerful 13 amp motor with a large all cast aluminum table-top offering over 400 sq inches of work space and comes with a stand. Add-on features include a quick-release rip fence, safety on-off switch, and large dust-free table top and easy blade adjustment. This table saw comes equipped with a 10 inch, thin kerf tungsten carbide blade. It includes a blade wrench, rip fence, miter gauge and push stick.

The_Powermatic_1792001K_Model_PM_2000_Cabinet_Saw
Technical Details
Quick release riving knife greatly reduces binding/kickback risk
Built-in retractable caster system (patent pending) for immediate shop mobility

Product Description
The award winning Powermatic 1792001K PM2000 Three-Horsepower, One-Phase Table Saw with Accu-Fence System and Rout-R-Lift sets a new standard for innovation with an array of patented features and massive body design. Years of input from woodworkers helped focus the features that make the PM2000 the new standard by which cabinet saws are judged.

Advanced Trunnion Mechanism
Though Powermatic's trunnion mechanism has long been regarded as the best in the industry, their designers further refined it. The rigid, box-style cast-iron construction, high-end bearings, and conical-shaped worm gear drive with increased contact area combine with the smooth, solid feel of the tilt and height adjustments. Also the adjustable backlash means users can easily adjust the mechanism back to factory-fresh clearances and feel.

Easy Adjustments and Mobility
Two oversize, eight-inch-diameter cast-iron handwheels, each with a large spinner handle, make blade height and bevel adjustments almost effortless, while a quick-release riving knife greatly reduces binding/kickback risk. Also, a built-in, retractable-caster system (patent pending) provides mobility, and a push-button arbor lock (patent pending) ensures rapid blade changes.

Durable Construction and Vibration-Free Performance
The PM2000 is built to last. Fabricated from heavy-gauge steel, its cabinet is fitted to a huge cast-iron base (the heaviest in its class) that provides exceptional stability and virtually eliminates vibration. Also, the full-length 5/8-inch-diameter arbor is precision machined from stress-proof steel to exceptionally high tolerances for accuracy.

The specially designed arbor threads eliminate the dip between them and the shaft that can allow thin dado chippers to hang out of alignment with the rest of the stack. To keep operation quieter and smoother, a poly-V drive-belt system transfers power from the motor to the arbor with virtually no vibration and less heat build-up.

Tackles the Big Jobs
Large workpieces aren't a problem with the 22- x 30-1/2-inch (W x D) primary cast-iron table surface, which expands to 42 inches long. All cast-iron surfaces are finely ground to ensure a smooth, mar-free work surface that provides more support for the big jobs. And a front- and rear-edge bevel prevents catching of the miter gauge on the table edge.

Also, the push-button arbor lock is accessible from above the tabletop, eliminating the need for dual arbor wrenches, while a melamine-surface extension table gives you even more room to work.

Power and Precision
The PM2000 is powered by a three-horsepower, one-phase motor controlled by a newly designed magnetic on/off switch that allows disabling of the machine when not in use, and protects against accidental start-ups caused by power fluctuations.

This machine also comes equipped with an industrial-duty Accu-Fence system for accurate cuts, and a heavy-duty, deluxe, micro-adjust miter gauge with aluminum-extruded 13-inch extension fence for dependable workpiece support and fine angle adjustments.

Dust Collection
For a healthier, cleaner work environment, a dust shroud encloses much of the blade below the table, and a quick release hose connects the shroud to a standard four-inch-diameter port on the rear of the cabinet.

The PM2000 is backed by a five-year warranty.

Powermatic_1792000K_Model_PM_2000_Cabinet_Saw
Technical Details
Left-tilting table saw with 50-inch fence; arbor lock; built-in retractable casters; dust collection
3-horsepower, 1-ph, 230-volt motor; riving knife with quick release; poly-v belt
Cast-iron trunnion and extension wings
Includes saw, fence, left and right wings, arbor wrench, (no blade or power cord)
85-by-37-by-34-1/2-inches; 600-pounds; 1-year warranty

Product Description
Powered by a three-horsepower, one-Ph motor, the award winning Powermatic PM2000 10-Inch Cabinet Saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast-iron base in its class to virtually eliminate table vibration, oversized cast-iron tables, and a push-button arbor lock that's conveniently accessible from above the tabletop.

Rugged Design for Smooth Operation
Designed with input from professional woodworkers, the PM2000 provides incredible quality, efficient functionality, and long-term durability.

Its refined heavy-duty trunnion mechanism features rigid, box-style cast-iron construction, high-end bearings, and a conical-shaped worm gear drive with an increased contact area to enhance the smooth, solid feel of the tilt and height adjustment.

A pair of oversized, eight-inch-diameter cast-iron hand wheels, each with a large spinner handle, makes blade height and bevel adjustments virtually effortless. And to prevent long-term use from loosening the hand wheels on their shafts, they are locked in place with machined grooves and keys rather than setscrews.

Precision Machined Arbor and Poly-V Drive Belt System
The full-length 5/8-inch diameter arbor is precision machined from stress-proof steel to exceptionally high tolerances for accuracy. It accepts stacked dado sets up to 13/16-inch wide, and because there is no gap between the threads and arbor shank, thin chippers won't hang out of line.

Also, the push-button arbor lock makes for rapid blade changes, while a high quality poly-V drive belt system transmits more power without slippage or excessive noise.

Generously Sized Tables and Extensions
All the high-luster, cast-iron surfaces are finely ground to ensure a smooth, mar-free work surface that provides more support for big jobs and have both a front- and rear-edge bevel for hassle-free work piece positioning.

Measuring approximately 30.5 x 22.0 inches (W x L), the primary cast-iron tabletop expands to 42 inches long when the standard cast-iron extension wings are bolted up, giving you plenty of space for even large work pieces.

Safe, Sturdy Design
The PM2000 also comes equipped with a newly designed magnetic On/Off switch for safety. To prevent accidental start-ups, there's a removable magnetic "key" that disables the switch when it's not in place. For additional protection against damage, a quick-release riving knife greatly reduces binding/kickback risk.

High-Tech Guard System
The PM2000's blade guard and riving knife system can be adjusted tool-free for the job at hand. At the same time, because the riving knife is mounted directly to the blade mechanism, the gap between it and the blade never changes during height or angle adjustments.

This maintains the safety a riving knife affords in virtually all cutting situations.

Accuracy and Precision
An industrial-duty 50-inch Accu-Fence System ensures accurate cuts. Adjustable angle indicators on the blade bevel scale for repeatable bevel cuts. Additionally, a heavy-duty, deluxe, micro-adjust miter gauge with a 13-inch extension fence ensures stable workpiece support and easy fine-angle adjustments.

Finally, to facilitate movement in and around the shop, the massive cast-iron base has a built-in retractable, four-wheel caster system.

Powermatic_1792002K_PM2000_Cabinet_Saw
Technical Details
Left Tilt Operation
Arbor Lock, quick and safe blade change
3-horsepower, 1ph 230-volts only
Retractable Casters built-inch
Shrouded Blade, efficient dust collection

Product Description
Powered by a three-horsepower, one-Ph motor, the award winning Powermatic PM2000 10-Inch Cabinet Saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast-iron base in its class to virtually eliminate table vibration, oversized cast-iron tables, and a push-button arbor lock that's conveniently accessible from above the table top.

Rugged Design for Smooth Operation
Designed with input from professional woodworkers, the PM200 provides incredible quality, efficient functionality, and long-term durability. Its refined, heavy-duty trunnion mechanism features super-rigid, box-style cast-iron construction, high-end bearings, and a conical-shaped, worm gear drive with an increased contact area to enhance the smooth, solid feel of the tilt and height adjustment.

A pair of oversized eight-inch diameter cast iron hand wheels, each with a large spinner handle, makes blade height and bevel adjustments virtually effortless. And to prevent long-term use from loosening the hand wheels on their shafts, they are locked in place with machined grooves and keys, rather than setscrews.

Precision Machined Arbor and Poly-V Belt Drives
The full-length 5/8-inch diameter arbor is precision machined from stress-proof steel to exceptionally high tolerances for accuracy. It accepts stacked dado sets up to 13/16-inch wide, and because there is no gap between the threads and arbor shank, thin chippers won't hang out of line.

Also, the push-button arbor lock facilitates rapid blade changes, while a high quality poly-v drive belt system transmits more power without slippage or excessive noise.

Generously Sized Tables and Extensions
All the high-luster, cast-iron surfaces are finely ground to ensure a smooth, mar-free work surface that provides more support for the big jobs. They also have both a front- and rear-edge bevel for hassle-free work piece positioning.

Measuring approximately 30.5 x 22.0 inches (W x L), the primary cast-iron tabletop expands to 42 inches long when the standard cast-iron extension wings are bolted up, giving you plenty of space for even large work pieces.

Safe, Sturdy Design
The PM2000 also comes equipped with a newly designed magnetic On/Off switch for safety. To prevent accidental startups there's a removable magnetic "key" that disables the switch when it's not in place. For additional protection against damage, a quick release riving knife greatly reduces binding/kickback risk.

High-Tech Guard System
The PM2000's blade guard and riving knife system can be adjusted tool-free for the job at hand. Because the riving knife is mounted directly to the blade mechanism, the gap between it and the blade never changes during height or angle adjustments. This maintains the safety a riving knife affords in virtually all cutting situations.

Accuracy and Precision
An industrial-duty 30-inch Accu-Fence System ensures accurate cuts, while adjustable angle indicators on the blade bevel scale for repeatable bevel cuts. Additionally, a heavy-duty deluxe micro-adjust miter gauge with a 13-inch extension fence ensures stable work piece support and easy fine angle adjustments

Finally, to facilitate movement in and around the shop, the massive cast iron base has a built-in retractable, four-wheel caster system.

Dimensions and Warranty Information
The PM2000 measures 37 x 39 x 65 inches (W x H x D), weighs 627 pounds, and is backed by a five-year warranty.

The_Makita_2703_15_Amp_10_Inch_Bench_Top_Table_Saw
Technical Details
10-inch table saw with 27-by-22-inch table; cam-locking rip fence; electric brake
15 amp motor; 3-9/16-inch cut capacity; rack-and-pinion design bevel adjust
PVC base, magnesium table, carbide blade
Includes saw, blade, rip fence, miter gauge, wrenches, manual
27 by 22 inches; 40 pounds; 1-year warranty

Product Description
For the price, Makita's 10-inch portable table saw is a solid choice for the job site. The 15 amp motor packs plenty of power, and with a 3-9/16-cut capacity, this saw will rip four-by material on a single pass. This saw also has an electric brake, so adjustments between cuts are both safer and quicker to make. The table's a good size, too: 27 by 22 inches. We also really like the saw's new cam-lock rip fence, which is much easier to adjust than double-locking designs. The bevel adjust has a pretty good rack-and-pinion design (metal, admittedly, would be better). All in all, this saw strikes a nice balance between weight (only 40 pounds) and vibration (minimal). Simply put, the Makita 2703 is a solid saw, better for the job site (quick, powerful, lightweight) than the home shop. For the shop, we'd recommend a saw with a more accurate fence.

The_Makita_2704_15_Amp_10_Inch_Contractor_Table_Saw
Technical Details
10-inch contractors benchtop table saw
Large cutting capacity (3-5/8 inches at 90 degrees and 2-1/2 inches at 45 degrees) rips 4x material in one pass; can use up to a 13/16-inch dado blade
Aluminum die cast, precision machined table top remains flat and true for out of the box accuracy
Includes carbide-tipped blade, rip fence, angled miter gauge, #5 and #19 wrenches, socket wrench #13-22
Weighs 82 pounds; 1-year warranty

Product Description
The only difference between this Makita jobsite saw and a fancy cabinet saw is that you can easily pick this one up and put it in your truck. In terms of power, capacity, accuracy and capability, it’s a draw.

A 15-amp motor revs up to provide 4,800 rpm, plenty for cutting anything you can feed it, and its impressive cutting capacity lets you rip 4-by stock in one pass without moaning or slowing – that’s power. The table’s perfectly flat, and with its extension, it can actually hand a full sheet of ply, cutting dadoes of almost an inch.

The thing that makes this saw stand out from its competitors is the T-slots for the miter gauge, resulting in a nice tight fit with zero play and total support – no tipping -- when you’re beyond the table surface. Even better, commercial jigs and accessories with the T-shank just slip right in.

The blade height mechanism is among the smoothest we’ve seen, and precision is unparalleled. The fence is sturdy and smooth as well, with predrilled holes for an auxiliary fence. It moves like a dream and locks down tight with an easy-to-grip cam handle.

Storage is well thought-out and executed on the 2704, with a place for everything from the fence to the push stick. We like that there’s even a place for the blade below the table to protect it while it’s traveling.

At 61 pounds, it’s light enough to tote, and there are handholds beveled out on the sides of the table to make the job easier. Contractors, trim carpenters and the home woodworker will love this saw.

Description:
JET_708307K_JWTS-10PF_Table_Saw
The JWTS-10 Workshop tablesaw is ideal for big jobs in a small area. The 1.5 HP maxi-torque motor powers the 10" blade with an exclusive double drive power system that transfers more power to the arbor than the conventional belt drive tablesaw.

Features:
Surface ground cast iron table with miter slots and beveled edge provides a sturdy, flat work surface

Steel extension wings increase your work area for larger work pieces

See through blade guard with splitter and anti-kickback pawls helps protect operator while giving a clear view of the material being cut

1-1/2HP maxi-torque 115V/230V motor prewired for 115V operation

Exclusive double-drive power system transfers more power to the arbor than conventional belt-drive systems

One-piece trunnion design offers increased strength and rigidity for more accurate cutting

Miter gauge with positive stops for accurate cross-cutting and mitering

Horizontally braced steel leg stand adds strength and stability to the saw

Left tilting for more controlled bevel cutting

Shrouded Blade increases dust collection efficiency

10" Blade included

For Bosch 4000 139 10" TABLE SAW (060 1476 139)

Part #1

Schematic:
4000.139

 

Models 50-175 M1 & 50-185 M1 - 10” DELUXE BUILDER’S TABLE SAW
- Right Tilt or Left Tilt

Features:
General_50-185M1_Table_Saw
Heavy-duty, precision cast-iron, ribbed table with miter gauge “T” slot.

Solid cast-iron extension wings (2).

Heavy-duty open steel stand and frame for greater stability.

Large metal hand wheels for quick and easy blade height and angle adjustments.

Convenient rail mounted switch.

See-through blade guard with splitter and anti-kickback fingers.

Forged, one-piece, precision-machined arbor for minimal blade runout.

Deluxe precision rip fence system with 30” or 52” (L) guide rails and heavy-duty locking lever for quick, accurate adjustments.

Onboard storage mounts for wrench, rip fence and miter gauge.

New patented adjustable bearings built into miter gauge bar to ensure a tight fit.

Included accessories:
• 4" dust hood (#50-190)
• Deluxe cast-iron miter gauge (#50-145)
• Table insert (#50-115 for 50-175 / #50-165 for 50-185)

Specifications:
Blade diameter: 10" (254 mm)
Arbor diameter: 5/8" (16 mm)
Arbor tilt range: 0° TO 45° (to right) - 50-175 / 0° TO 45° (to left) - 50-185
Max. Depth of cut at 90°: 3" (77 mm)
Max. Depth of cut at 45°: 2 1/8" (54 mm)
Max. Rip to left of blade: 12" (305 mm)
Max. Rip to right of blade: 30" (763 mm) / 52” (1321 mm)
Dado capacity: 3/4" (19 mm)
Arbor speed: 4200 RPM
Table size (w/extension wings): 27’’ x 40 1/2” (686 x 1029 mm)
Extension wings size (2): 10 1/4” (261 mm)
Base dimensions (L x W): 21" x 26” (533.4 x 660.4 mm)
Motor (pre-wired 110 V): 2 HP, 110/220 V, 15/7.5 A
Weight: 231 / 251 LBS (105/114 kg)

Features:
General_50-090K_M1_Jobsite_Table_Saw
Heavy-duty, precision cast-iron, ribbed table with miter gauge t-slot.

2 1/2” dust port allows easy connection to a dust collection system.

Deluxe, quick adjusting miter gauge.

Ruggedly built saw carriage.

Arbor driven by a two step belt, ensuring straightness and accuracy when the blade is tilted.

Locking lever clamps down the extruded aluminum fence to both the front and back rails.

Heavy-duty folding stand with wheels for easy mobility and storage.

Specifications:
Blade diameter: 10" (254 mm)
Arbor diameter: 5/8" (16 mm)
Maximum depth of cut at 90°: 3 1/4" (83 mm)
Maximum depth of cut at 45°: 2 5/16" (59 mm)
Maximum rip to right of blade: 30" (763 mm)
Dado capacity: 3/4" (19 mm)
Arbor speed: 3450 RPM
Table size (w/o extension wings): 20" x 25 1/4" (508 x 641 mm)
Extension wings size (2): 10" x 25 1/4" (254 X 641 mm)
Dust port diameter: 2 1/2" (64 mm)
Motor (pre-wired 110 V): 2 HP, 110/220 V, 13/6.5 A
Weight: 247 LBS (112.3 kg) WITH STAND / 196 LBS (89 kg) WITHOUT STAND

Description:
Telescoping fence delivers 24-1/2 inch rip capacity without sacrificing portability
Rack and pinion design makes adjustments fast, smooth, and accurate, ensuring fence is always parallel to the blade.
Telescoping rails retract within the saw top for easy portability
15-amp high-torque motor has the power to cut pressure-treated lumber and hardwoods
Heavy-duty internal motor mechanism stabilizes the arbor, which keeps vibration to a minimum.
Dust collection port that easily connects to a vacuum for efficient dust extraction
Includes a 10-inch 24-tooth carbide blade, portable stand (Model DW7440) and miter gauge


Product Specifications:
Arbor:    5/8"
Max Rip to the Right of Blade:    24-1/2"
Max Depth of Cut @ 90°:    3-1/8"
Blade Dia:    10"
Max Depth of Cut @ 45°:    2-1/4"
Net Weight:    64 lbs.
Amp Rating:    15
Dust Port:    2-1/4"
Width:    Dado, 13/16" max.
Max Rip to the Left of Blade:    15-1/2"
RPM:    3,650 no load

Manufacturer's Notice
The pivot bracket on the saw can separate which can misalign the blade and the fence and cause kick back. This poses a laceration hazard to consumers. http://www.cpsc.gov/cpscpub/prerel/prhtml08/08259.html

Features:
Delta_36-715_Hybrid_Table_Saw
The DELTA 36-715 includes 1-3/4 HP, 120 Volts (240V capable) motor, deluxe see-thru blade guard with splitter and anti-kickback fingers, heavy-duty rip fence, miter gauge, 10" saw blade, table insert, arbor pulley, poly v-belt, cabinet, rail, T2 30" fence, instruction manual

Specifications:
Left tilting blade tilts away from fence.
45° and 90° bevel stops adjustable from the table top; deluxe miter gauge.
Oversized on/off switch with full overload protection.

Features:
Delta_TS350_Contractor_Table_Saw
Includes a 1 HP, 120 Volts, Single Phase induction motor, switch cord and plug; leg stand, rip fence, guide bars, cast-iron extension wings, miter gauge, 4" dust chute, see-thru blade guard with splitter and anti-kickback fingers, 10" carbide-tipped saw blade and wrenches.

Specifications:
Large cast-iron table with cast-iron extension wings measures a full 22-1/4" x 38-3/8".
Miter gauge with adjustable stops at 90º and 45º (right and left) for continued accurate straight and angle cutting.
Solid undertable construction with cast-iron trunnion, motor and trunnion support brackets for rigidity; accurate blade alignment.

Features:

Delta_SM200L_Shopmaster_Bench_Top_Table_Saw
The Delta SM200L Shopmaster 13 Amp 10-Inch Benchtop Table Saw; cuts 3-inches at 90 degrees, 2-1/2-inches at 45 degrees Heavy-duty 13 amp motor; self-aligning rip fence aligns parallel to blade; T-slots for miter gauge Magnesium table; heavy-gauge steel stand Includes saw, stand, rip fence, miter gauge, blade guard, blade, table insert, wrenches, manual Table size: 17-1/2 by 26- inches; table height on stand, 34 to 3/4-inches; 52 pounds

Technical Specifications:

13 Amp 10-Inches Benchtop Table Saw
Heavy-gauge steel stand
Table size: 17-1/2 by 26- inches
Weight 52 pounds

If you’ve searched the Internet for top rated Contractor Saws you already know that the Ridgid TS3650 Table Saw makes almost all lists, either as best value or best high end features.  You also know the model has been discontinued in favor of the 3660, and even that model will be tough to find.

With increasing competition and technological advantages more and more manufacturers are discontinuing well regarded older models in favor of upgraded offerings. 

Ridgid has chosen to concentrate on its higher end portable model, the TS2410LS, and its entry into the Hybrid Table Saw market, the R4511.  Their Hybrid Table Saw features the latest advance in table saw surface construction – a granite table top.

But the TS3650/3660 is still out there and with such universal acceptance as a saw that offers more high end features than any other at an excellent price point, it may be worth the search.  Let’s look at some of the features that set the Ridgid TS3650 and TS3660 apart from the competition.

Construction

Ridgid didn’t spare the cast iron in the design of this saw.  The table surface, the extensions, and a uniquely designed single piece trunion cradle are all made of cast iron.  Many competitive models have cast iron tables, with lesser materials used in the extension wings and the trunion assembly.  The overall heft of the design and construction of the saw contributes to the low-vibration and smooth-running quality of the saw’s motor.

The TEFC (Totally Enclosed Fan Cooled) 1.5 hp induction motor keeps dust and debris out and yields a hefty 3,450 rotations per minute (Rpms).  A TEFC induction motor will last a very long time, so you should be able to find used TS 3650/3660 models out there with years of life left in them.  As a contractor saw the motor is mounted on the outside of the table, a negative in the eyes of many reviewers.  The newer R4511 – as a true hybrid saw – has the motor mounted underneath the table.  The drive system uses a poly V-belt – a huge advantage over cheaper direct drive systems.

The controls are well positioned in the front of the saw and easily accessible.  An excellent safety feature is the ease with which the operator can cut the power to the saw simply by touching the on/off switch with the knee.   The splitter/blade guard will need tools to be removed and reattached, which is a safety drawback.  The newer R4511 uses the much safer riving knife design, where the knife is not a part of the blade guard assembly and rises and lowers with the blade itself.

Accessories

The miter gauge is a T-style and the fence is self-aligning and is easily locked to the front and rear rails.  The fence also features a micro-adjust knob.  The included blade is a 40 tooth, carbide-tipped, thin kerf blade, suitable for both ripping and cross-cutting.

The Herc-U-Lift mobile base allows the operator to simply push down on a foot pedal, which raises the entire saw which can then be rolled around on caster style, heavy duty wheels.  This feature also enables some contractors to actually take this saw along to job sites, although lifting it is definitely a two person job.

Assembly

Reviewers have found the assembly instructions very clear and easy to follow.  Estimates for total time needed to assemble the TS 3650/3660 range from four to eight hours.  Everything you need comes in one large, heavy box and you would be well advised to have someone with you during assembly.  The saw gets high marks for the ease of initial alignment as well.

This model is well worth an extended search, but if you are not having much luck or you really don’t want to invest the time and effort into hunting for it, you might want to consider the Hybrid R4511.  Although a few units were recalled in the late summer of 2009, Ridgid still features them on their website and they were selling at selected Home Depots in mid-January of 2010 at clearance discounts.  Perhaps yet another new and improved model is coming!

Description:
10 in. Craftsman table saw with a folding collapsible stand for easy portability and storage. Right and left telescoping wings for 30 in. right and 18 in. left rip capacity. Toolless assembly to legset and blade guard for quick and easy setup. Dustbag mounts onto stand for fast setup and clean work area. Rear outfeed to help support workpiece when ripping.

Features:
On-board storage for stand, blade, rip fence, miter gauge, and wrenches Leveling foot on stand for easy setup on a variety of surfaces Powerful 15-amp motor for most cutting applications Durable cast-aluminum tabletop for smooth cuts 10 in. 36-tooth carbide blade for fast, smooth cuts 1/32 in. scale on rails for precise measurements

Description:
10 in. Craftsman table saw with superior action easy folding stand allows for storage in the workshop and effortless mobility from one jobsite to another. Sliding front and rear rails allow for 33 in. right and 30 in. left rip capacity. Sliding miter table with oversized miter fence and built-in miter gauge allows for smooth and accurate cross-cuts.  Built-in router table and mounting kit allows for router hook-up.

Features:
Sliding miter table and router table can be lifted and moved for proper placement when adjusting rails.
On-board storage for cord, blades, rip fence, miter gauge, and sliding miter table Large 8 in. wheels for superior maneuverability 2-1/2 in. dust port for easy hook-up to wet/dry vac. 
Powerful 15-amp motor for most applications 10 in. 36-tooth carbide blade for smooth cuts 1/32 in. scale on rails for precise measurements.
48 in. when tables are extended; 32 in. wide for operation; 36 in. high.

Although Craftsman tags the 21828 as a professional jobsite bench top saw, it is an attractive option for all users. It has some truly unique design features, most notably the wheels and the telescoping handle. People buy bench top saws because they can be picked up and moved from one jobsite to another. Mostmodels weigh around fifty pounds, but that’s still a load to lug around in your arms.With the six inch wheels and the pull out handle, the 21828 in effect becomes its own dolly.

This saw retails for under $300 and no other saw on the market has this useful feature. The motor is powerful enough for most anything and even has higher RPMs than a comparable and more expensive DeWalt model. Included accessories all have on board storage and the saw features the newer 3 position blade guards that can be removed without tools for those special cuts.

So far, this saw has been well received but Craftsman would do well to consider offering a stand as an accessory option. Many bench top saws come with stands so they can do double duty on a jobsite as well as in the shop, or they offer one as an accessory.

Pros
This saw easily compares to the Dewalt 10 inch Compact Saw and cost $100 dollars less!

Excellent saw for the money.  At under $300 this saw is the cheapest good contractor saw on the market right now.
15 AMP, 5,000 RPM motor (The Dewalt has a 3850 rpm motor)
3 position tool-less blade guard can be used as a spreader and guard for through cuts, a riving knife for non-through cuts, and eaily removed for dado cuts (Dewalt has not been upgraded for the 2009 safety standards)
Steel tubing roll cage wraps around the saws cabinet for added durability

Telescoping handle and 6 in. wheels for easy portability (Dewalt has no handle or wheels)
Right sliding table extension extends up to a 24 in. rip capacity
Rear out feed support for ripping operations
Accepts 6 in. stacked dado set-up to 1/2 in.
Self-aligning rip fence clamps on front and rear of table for cutting accuracy
3/4 in. T-slot miter gauge and dual T-slot miter grooves
2 1/2in. dust port for easy attachment of dust collection
On-board storage for Miter Gauge, Push Stick, Power Cord and Blade Wrenches
Includes: 36 Tooth Carbide Blade, Rip Fence, Miter Gauge, Blade Wrenches, Push Stick, Blade Guard, Anti-kickback Pawls, and Hex Key

Cons
It does not come with a stand.  A lot of contractors just plop their saw on the ground and use it there but to use a table saw safely the table should be about waist high.  You will have to buy a stand or build your own stand out of a couple of 2X4’s and 1/2 inch plywood.

A good solid stand for this saw is the Bosch Gravity Rise Stand.  If you want a cheaper stand the DeWalt Portable Table Saw Stand should work just fine.

 

Description:
A 15 Amp motor lets the DeWalt DW745 Heavy Duty 10-Inch Compact Job Site Table Saw make quick work of everything from bevel cuts in hard woods to resizing sheet materials. Featuring a 16-inch maximum rip capacity, a patented rack and pinion fence that telescopes to deliver incredibly fast adjustments and improved accuracy, while also sliding into a compact position for transport, this saw is packed with thoughtful features that make it an easy choice. Bevel applications are easy to tackle with the ability to adjust the blade from 0 to 45 degrees, while the included 24T carbide blade provides improved cut quality and offers an extended life to save you money.

Other unique design elements include a metal roll-bar base that provides durability on the job, adjustable rear feet that make it easy to steady the saw on uneven ground, a special coating on the table surface that reduces friction for smoother cutting with less effort, and a dust port that allows you to connect a 2-1/2-inch shop vac and keep your work area clean. Kit includes saw, miter gauge, push stick, carbide blade, and blade guard. This DeWalt high-performance industrial tool is backed by a 3-year limited warranty.

Features:
15 Amp motor deliver 16-inch max. rip capacity for clean, quick cuts, even through hardwoods
Rack and pinion rail design for fast, easy fence adjustments
0- to 45-degree blade adjustment for accurate bevel cuts
Weighs 45 pounds; backed by a 3-year limited warranty
Includes saw, miter gauge, push stick, carbide blade, and blade guard

Hitachi_C10RA3_Benchtop_Table_Saw_with_Stand

Technology is the common thread behind the Hitachi brand. It's what makes Hitachi products superior in design and durability. From its birth, Hitachi has pioneered innovative technologies that have improved lives around the world. This knowledge is shared across all Hitachi divisions worldwide and is incorporated into applications that benefit many different products.

Features:
Direct drive universal 15 Amp motor produces 5,000 RPM to power through the toughest ripping applications
Oversized aluminum table top for extra support
Telescoping table extension supports 24-1/2" of ripping capacity to the right and 10" to the left
Self aligning metal rip fence with quick-lock slides easily along the table for reliable, consistent and easy set up
Cut line indicator allows the user to pre-align cuts with ease
Front mounted knob allows the user to quickly adjust the blade height and side mounted knob adjusts the blade tilt
Sturdy metal stand is included to support the base and can be removed and folded away for easy portability
Stand offers an adjustable foot on the front right leg that helps to stabilize the saw on uneven ground
Integrated storage on the base keeps the standard accessories securely on board during transport
Dust port located at the rear of the base measures 2-1/2" and connects to a shop vac or dust collection system for a cleaner work environment

Includes:
10" 36-Tooth Carbide Tipped Blade
Miter Gauge
Rip Fence
Dado Insert
Wrench
Folding Metal Stand

Grizzly_G0444Z_10_Inch_Table_Saw_2_HP_Single-Phase_220V_with_Cast_Wings

Grizzly has re-vamped their new contractor-style saw by taking 20 years of customer comments and in-use experience and applying them to this new saw. We feel that there is no contractor-style saw on the market (at any price) that can compare in quality to this table saw.

Features
Patented heavy-duty cast iron miter gauge with adjustable bar
T-slotted table
Rock solid Shop Fox aluma-classic fence with easy adjustment feature
57" rails are standard (30" ripping capacity)
Powder coated paint for durability
Large dust hood underneath with a 4" connector port
Side braces punched to accept hooks to hang blades, wrenches, inserts, etc
Heavy duty cast iron handwheels with chrome handles
Fence mounted switch for easy access
Precision ground cast iron table and wings
Includes regular as well as dado blade inserts
Beveled table edge
Precision machined cast iron motor pulley for reduced vibration
Aluma-classic fence lifts off instantly
G0444Z approximate shipping weight: 298 lbs.
Extension rails available to rip 50" wide
Made in a ISO 9001 rated factory
2HP 110V/220V, pre-wired 220V with cast iron table and wings

Grizzly_G0661_10_Inch_2_HP_Contractor_Style_Table_Saw_with_Riving_Knife
You may be wondering how Grizzly can offer a Contractor Style Table Saw with a riving knife that moves up and down with the blade? Well, they combined the lightweight open contractor style stand with a vertically aligned motor and blade raising and tilting mechanism that's supported by heavy cast iron table mounted trunnions. No more cantilevered motor mounts and stationary riving knives. You also get the benefit of very efficient dust collection since the hood moves with the blade mechanism. With all these great features, you'll love this table saw.

SPECIFICATIONS:

Motor: 2 HP, 110V/220V, single-phase, prewired to 110V
Amps: 20/10
Precision ground cast iron table w/wings measures: 27"D x 44"W
Table height: 35-3/8"
Foot print: 26"W x 26-1/4"D
Arbor: 5/8"
Arbor speed: 4200 RPM
Capacity @ 90Deg: 3-1/8"
Capacity @ 45Deg: 2-1/4"
Rip capacity: 36" right, 12" left
Overall Size: 66"W x 38"D x 40-3/4"H
Approximate shipping weight: 342 lbs.

FEATURES

2-1/2" dust port
Beveled table edge
Blade height adjustment travels on vertical posts
Fence instantly lifts off rails
Precision ground cast iron wings
Cast iron trunnions
Aluminum miter gauge

Grizzly_H4231_Zero_Clearance_Table_Saw_Inserts
Special phenolic composition out-lasts and out-performs wood, foam and plastic. Supports work right up to the blade.

Each is fully adjustable with leveling screws. Sized to fit Grizzly's G1023SL & G1023SLX table saws. Safety orange. Nominal dimensions are 13-3/8" x 3-3/4"

Sold as singles, not as pictured.

Buy at Amazon.com

Grizzly_G0576_10_Inch_Table_Saw_2_HP_Single-Phase_220V_Left-Tilt_with_Cast_Wings
Grizzly caters to the professional woodworker and the serious hobbyist. As an example, they don’t even make a portable table saw, the most popular type of table saw on the market today. But if you compare the Grizzly G0576 to the more popular Ridgid TS3660 or the Craftsman 22114 you’ll find the Grizzly gets much better reviews and is not that far off in price. The Craftsman 22114 goes for $759 while the Grizzly is shipped to your door for $789. For some reason, Home Depot no longer sells the TS3660 in the United States but it is still available in Canada for 599 Canadian dollars.

The G0576 is a solid cast iron table with a cast iron pulley assembly and a full 2 HP motor. While it comes prewired for 220v it can be converted to 110v. The rip fence is the Shop Fox Classic, a Biesemeyer look alike that gets very high marks from expert reviewers. It has a powder coated finish, a beveled table edge and includes dado inserts.

Grizzly_G1023SLX_Cabinet_Table_Saw

Once again, if price is a concern, this saw goes for $1169 delivered and if you check the woodworking forums you’ll find expert users who compare it very favorably to the PM66 from Powermatic which goes for around $3500. It has a 3 HP motor with a triple V belt drive but is strictly a 220v machine so you may have to add a special circuit. If you want more power, the G1023SLWX has a whopping 5 HP motor for about $100 more! In addition, the slide out extension table on the G1023SLWX doubles as a router table.

The G1023SLX has 7 foot rails and the highly acclaimed Shop Fox Classic rip fence. It also features a slide out extension table allowing a full 54 inch width cutting capacity to the right of the blade. If you like the idea of getting a Grizzly you should see if you have a Shop Fox dealer in your area. Shop Fox has some table saw models that are virtually identical to some Grizzlies and they come with a two year warranty, backed up with local dealer service. Shop Fox also has a more complete line of accessories like their D2260 and D2057 mobile bases that can be added to allow heavy contractor saws to be moved when needed.

Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.

Bosch TS1004 Dust Bag & Elbow for 10" Table Saw Features:
• Table Saw Dust Collection System. Model TS1004. Keeps work area clean, easily attached and emptied.
• Table Saw Attachments
• Part No. TS1004
• Used on Model No. 4000
• Sales Pack Quantity 1

Bosch TS1007 Dado Insert for use with stack dado and rabbet cutters Accommodates up to 3/4" lumber Plastic construction - Dado insert for use with stack dado and rabbet cutters - Accommodates up to 3/4" lumber - Plastic construction

Bosch TS1002 Rear Outfeed Support Extends 18" and stores flush to table, extends working depth table saw Hardened metal construction, aluminum mounts - Extends 18" and stores flush to table, extends working depth table saw - Hardened metal construction, aluminum mounts

If you're thinking about purchasing a premium portable table saw, you might want to wait a couple months. We just got advance information about a new line of portable table saws from Bosch Power Tools with features that made us say: "We gotta test that tool."

The new Bosch 4100 series of 10" saws – due out in a couple months – will be the first portable table saws that we know of that have European-style guarding. Bosch is calling it the "Smart Guard System" but around our shop we call this style of guard the only system that makes sense.