Big table saws may deliver a whole lot of power, but they just aren’t convenient for handymen or carpenters who need a tool on the fly when working at a client’s house.
The obvious solution is to get a portable table saw, one that is small enough to move around with ease, yet also powerful enough to get any job done without forcing you to use another piece of equipment.
We’re here to give you some great tips on finding a decent portable table saw, plus we have a long list of portable table saw options for you to consider, each of which make for prime choices.
A table saw is one of the handyman’s greatest assets and best friends. This is because a good table saw can cut through wood, metals, ceramics, plastics, and other materials with ease. A good table saw can help you cut boards length wise, width wise, and depth wise, it can rip boards, make cross cuts and so much more.
You can use a table saw for simple cutting purposes, for straightening boards as you would with a jointer, and for creating joints too, plus a ton of other purposes too. The thing with table saws is that they can end up being fairly heavy and immobile, at least the big and high powered ones.
The trick for any carpenter or woodworker, especially one that moves from one jobsite to another on a regular basis, is to get a table saw that is fairly lightweight and portable. A large part of a table saw being portable is, of course, the weight of the saw in question, but it also has to do with the accessories that it comes with.
Perhaps the most important of a table saw being portable is the stand that it comes with if it comes with one. A good stand that folds down to a small size and also has wheels is an excellent accessory to get with any table saw.
A portable table saw is one that you can set up virtually anywhere, one which you can easily get in and out of your truck, and one which can easily be moved from one jobsite to another. The benefits are quite obvious here. A more portable saw is a saw that takes less effort and strength to move around, things that will save both energy and valuable time.
On a side note, while portable table saws might not have quite as much power as a stationary one, they are also much cheaper due to their smaller size.
Not all portable table saws are going to be the same, that is a given, and every table saw will have various features which differentiate it from the rest. The trick to finding a good portable table saw is to pay attention to a few specific features that will decide whether or not you are satisfied with your purchase.
One of the most important parts of buying a table saw, when you want a portable one, is the size and weight of the saw in question. Ideally, the saw you get, to remain fairly portable, should not exceed 70 pounds in weight. Any heavier than that, carrying around will become harder and harder. Just as important regarding portability is the size of the saw in question.
A portable table saw is generally smaller than a stationary one, but some are still larger than others. It’s a good idea to get a fairly compact model for easy storage. Just because the model you get is compact, does not mean that it can’t serve larger purposes, meaning that you can always get one that has extending tables to accommodate larger workpieces.
A good stand makes a table saw very versatile because it allows you to set it up anywhere you go, thus reducing or even eliminating the need for a workbench, table, or some other surface to let the saw rest on as you work.
On that same note, the stand should be able to fold down for easy storage and space saving qualities. If you are getting a saw and need it to be portable, a good stand, possibly with wheels, is something that you definitely need to look for.
A good portable table saw can still have anywhere between 3,500 and 5,000 RPM, which is more than enough to cut through some very tough materials. As well, you can expect a decent portable table saw to have a ripping capacity anywhere from 18 to 24 inches and a cutting capacity between 3 and 4 inches when the blade is at a 90-degree angle. The trick is to find a good mix between small size and high power that will serve all of your cutting needs.
There are of course a few other features which every good portable table saw should come with. These features include things like extending tables, a secure and easy to adjust fence system, a versatile miter gauge, a good blade guard system, easy adjustability, and a dust collector port. Each of these things definitely serve to add value to any table saw that you consider buying.
Let’s not waste any time at all and get right into reviewing the very best portable table saws which the market has to offer you.
This is one fantastic option to go with and much of that is thanks to the high portability of this table saw. The DEWALT DWE7491RS comes with a mobile rolling stand. Now, while the whole saw and the stand together weigh around 110 pounds, making it fairly heavy, the fact that the stand comes with wheels more than makes up for it. You can easily set up this table saw on any location thanks to the folding table, plus the wheels make moving it around as easy as can be.
The DEWALT DWE7491RS is also a prime choice thanks to the high powered 15 amp motor that can rip through a variety of tough materials with ease. There is also the point that this thing has a 32 – ½ inch rip capacity, not to mention that it can cut through boards as thick as 3 – 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. The high powered motor and large cutting capacity of this model are definitely a bonus.
This table saw also features a rack and pinion telescoping fence, which is very useful for guiding wood through the blade, plus it is also beneficial because it can extend outwards to enlarge your workspace and provide larger workpieces with the support you need to get the job done right. The telescoping fence is a great portability feature because it allows you to retract it when the saw is not in use to form a compact and easy to move package.
The fence system makes cutting materials very smooth and accurate, something which can also be said for the sliding miter gauge that can go from a straight 0 degrees all the way to 45 degrees for angled crosscuts. Finally, this saw also comes with a durable carbide blade, a push stick, it can accommodate dado blade inserts, and it has a dust collection port too.
This is an article on the best portable table saws, which means that the Bosch 4100-09 is definitely an option that needs to be here. One of the best features that this table saw brings with it is that it comes with an intuitive gravity rise stand. This stand is awesome because it can be raised or lowered to meet your height requirements, thus eliminating the need for a workspace or work table.
There is also the fact that the rising stand folds for easy storage, not to mention that it comes with a set of wheels for ease of portability. The saw itself does weigh around 60 pounds, but the highly portable stand makes up for that drawback with ease, plus the stand also has easy to carry handles built in as well.
Something else that makes the Bosch 4100-09 a good choice is because the powerful motor provides the blade with over 3,600 rounds per minute, meaning that it can definitely get through some tough materials without question.
Yet another thing that makes this particular table saw model an ideal choice is that it has a large cutting capacity and can get through materials as thick as 3 – 1/8 inches at 90 degrees and materials as thick as 2 – ½ inches at 45 degrees. Speaking of the blade, it can bevel anywhere from -2 to 47 degrees, something that makes this saw quite versatile.
Everything about this saw gives you optimal control over the cuts that you make. It features easy to adjust and easy to secure miter gauges and a rip fence system, both of which allow you to make precision cuts with ease. Both of these features help guide the workpiece through the blade with minimal trouble, plus they help with accuracy too.
Even better is the modular blade guard that can be adjusted for various uses, plus of course the blade guard keeps you safe too. This model also comes with a riving knife with anti-kickback features to increase the safety and accuracy of this table saw even more.
This is a great option to go with regarding portable table saws. While it does not come with any special portable stand with wheels or carrying handles, the whole saw does only weigh slightly over 60 pounds, making it a fairly light option to go with.
The Makita 2705 has a great 15 amp motor that provides you with over 4,800 rounds per minute. This means that the blade can cut through some very tough materials like hardwood without problems. The high cutting capacity of this table saw is another bonus to consider.
It can get through materials as thick as 3 – 5/8 inches with the blade at 90 degrees, and it can get through materials as thick as 2 – ½ inches with the blade at 45 degrees. There is also the fact that this table saw allows you to rip sheets of plywood of up to 4 by 8 feet in size. If you need a moderately weighted saw with high power capabilities and a large cutting capacity, the Makita 2705 makes for a prime choice.
Yet another thing you should be able to appreciate about this table saw is that it has an extending table which greatly increases the amount of space and support that this saw offers you. The Makita 2705 also features adjustable dual side guards for ease of measurement from the fence to the blade.
Even better is the actual fence system which can be easily moved back and forth, it’s easy to adjust, and it locks into place securely. All of those things can also be said for the miter, which allows you to make precision crosscuts and angled crosscuts without worrying about accuracy.
This thing also comes with a riving knife that helps to reduce kickback, stops wood from jamming in the blade, and also helps split the wood completely once cut. The riving knife can be adjusted to 3 different heights for through, non-through, and dado cuts, making it very versatile indeed. For increased safety, this table saw also has dual anti-kickback pawls, plus an easy to adjust tool-less blade guard.
One of the best parts about this particular saw is that it features a combination of power, ease of portability, and durability that virtually no other table saw can ever hope to match. This thing is made of a steel base that will definitely provide you with the longevity that you need to get any job done for years to come.
Even though the saw is made out of strong materials, it is still fairly light weight. The whole thing weighs somewhere around 52 pounds, making it moderate in weight, plus it come with a convenient carrying handle to make moving it around fairly fast and simple. The base of this saw also has rubber feet to add a certain degree of stability to the saw as a whole.
The handle is ergonomically designed and features padding to make carrying it easy as well as comfortable. This thing also features dual side handles to make loading and unloading it a piece of cake.
Something else that makes this saw a very good choice to go with is the fact that it features a 4 horsepower motor that provides you with up to 5,000 rounds per minute of blade turning power. The strong motor, decent blade elevation, and good table size all mean that you can work on larger pieces with ease, not to mention that the BOSCH GTS1031 has an 18 inch ripping capacity too.
The BOSCH GTS1031 also a square lock rip fence that helps to decrease waste, increase cutting trueness, and provide you with some of the most accurate cuts around. The fencer system can be easily moved, adjusted, and locked into place for great versatility.
The same can be said for the miter gauge, not to mention that the miter can be adjusted to make both straight and angular cross cuts with ultimate precision.
This thing even comes with a riving knife that helps to reduce kickback and also prevents material from pinching in between the blade once it has been cut. Even better is the smart guard that provides your fingers with a certain degree of safety, a guard that can be easily removed or adjusted for position for various purposes.
The next spot on this list of the best portable table saws definitely goes to the Craftsman Evolv. This is not the lightest model around, it weighs around 50 pounds, but that is still not all that heavy when compared to some other table saws, plus it does come with its own stand that can be set up anywhere for easy on the go use.
This is a fairly portable table saw that any contractor or handyman would be happy to use.
The Craftsman also makes for a decent option because it has a sheer table top which lets you smoothly feed wood into the blade for increased safety. There is also the fact that the whole table saw including the stand is made of the very high-grade materials that will surely last for a very long time.
The strong steel table top is also small enough to be portable, yet also large enough to provide support to some pretty big workpieces.
This model also comes with anti-kickback pawls to stop wood from flying in your face, plus it also has an advanced guarding system to cover the blade as much as possible to keep your fingers as safe as can be. The blade guard can also be easily adjusted to accommodate a riving knife. All of these features make the Craftsman Evolv very safe to use.
This model also features a fairly powerful 15 amp motor to cut through thick materials with ease, plus at 90 degrees the blade has a cutting capacity of 3 inches, making it a pretty powerful and versatile tool without a doubt. Even better is how this saw comes with an easy to mount fence which can be quickly adjusted to various positions for on the fly use.
Just as easy to adjust as the fence is the miter gauge which allows you to make accurate crosscuts and angled crosscuts without question. Everything about this saw is very easy to use and adjust, it provides for accurate cuts every time, it is fairly powerful and has a decent cutting capacity, it is a durable saw, and it is also quite portable too.
The next great table saw option on the list regarding portability is the Rockwell BladeRunner Portable Tabletop Saw. Now to be clear, this is not one of the usual table saws which we generally talk about, because instead of a circular bladed saw, this is a jigsaw, but that doesn’t mean it doesn’t deserve a place on this list.
This is an extremely portable table saw and that is thanks to the fact that the whole thing only weighs 15 pounds, making it one of the lightest possible options out there, something which is great if you are always on the go and moving from one jobsite to another. It even has a built-in tabletop handle so you can carry it anywhere with just one hand.
Even better is that setting it up takes less than a minute for the ultimate in versatility. There is also the fact that the hold down guard and the built in splitter makes cutting larger pieces easy and very safe too. Something else that makes using the BladeRunner easy and safe is the addition of rubber feet and a stabilizer bracket which lets it sit on multiple surfaces with stability.
This thing also comes with a reliable and easy to adjust miter fence that lets you do cross cuts easily. The Rockwell BladeRunner also has a large steel rip fence which lets you make accurate long cut with ease, not to mention that both the fence and miter are easy to adjust.
Making long cuts, cross cuts, or angled crosscuts has never been simpler. This model comes with 5 jigsaw blades, blades which can be easily replaced without the use of tools for great user friendliness.
This table top saw also has a decent cutting capacity because it can get through wood as thick as 1 – ½ inches, PVC pipe as thick as 1 – ¼ inches, and through aluminum and ceramic as thick as 3/8 of an inch.
The Jet JBTS-10MJS Table Saw is a good option to go with because it has an excellent riving knife that helps to stop wood from jamming into the blade, plus it helps reduce kickback as well, a great safety feature. Even better is how this model comes with anti-kickback pawls which reduce kickback even more.
This thing also has a great blade guard system that will keep your fingers safe and is also easy to adjust to various positions for different uses. If you need a safe table and portable table saw, this is a good choice to consider.
Another good feature about this particular model is that it comes with an easy folding wheel stand. The stand eliminates the need for you to have a work table, plus it folds up for compact storage and transportation too.
There is also the fact that the stand has wheels which makes it more portable than ever, not to mention that the stand is made out of heavy duty materials for the ultimate in durability. The saw may weigh around 100 pounds, making it a relatively heavy model, but the great cart it comes with is more than enough to compensate for the heavy weight.
This is a fairly powerful saw and it is thanks to the 4.4 horsepower soft start motor. The motor is easy to start, it’s fairly quiet, and it is more than powerful enough to take care of all your cutting needs.
Of course we can’t forget the dual extending tables that provide you with increased cross cutting and length cutting space. These extending tables are great for providing support when need be, and once retracted they help form a compact package.
Just as useful is the versatile fence that easily clamps down for a secure hold, and the great miter system that allows for awesome crosscuts and angled crosscuts. Both of these items are easy to adjust and help provide you with an unparalleled level of cutting accuracy and smoothness.
The Ridgid 4510 is another good portable table saw option to consider. One of the best parts about it is that it comes with a heavy duty folding stand. The stand is very strong and can support the saw wherever you choose to set it up, meaning that you don’t require a work table to use this table saw.
Even better is that the table folds for easy storage and transportation, plus the table itself has wheels so you can easily move it from one spot to another. The saw does weigh a fair amount, but the stand makes up for that, plus the fairly heavy weight of this saw reassures us that it is made out of some really strong materials.
Another beneficial aspect of this table saw is that it has a powerful 15 amp motor which provides the blade with over 4,000 rounds per minute, which is more than enough to cut through a large variety of tough materials.
At 45 degrees this saw can cut through materials as thick as 2 – ¼ inches, and at 90 degrees the blade can get through materials as thick as 3 – 1/8 inches. Moreover, this table saw has a ripping capacity of 25 inches to the right of the blade and 12 inches to the left of it.
This saw is also a good choice regarding user friendliness. Everything including the miter gauge, rip fence, blade elevation, and blade angle can be easily adjusted with the turn of a lever or knob. Moreover, the fence locks firmly into place and can be easily moved around for some great versatility.
Next, the included miter also helps you to make good crosscuts and angled crosscuts too. This thing also has a tool free blade guard so you can adjust the guard in a split second to accommodate a variety of purposes. All in all, the Ridgid R4510 Table saw makes for a versatile, convenient, and powerful table saw option.
Yet another good choice regarding a portable table saw is the DEWALT DW745 Table Saw. One of the most convenient features of this particular model is that it only weighs around 45 pounds, making it a very lightweight option to go with. It does not come with a folding stand or portable cart, but the light weight nature of it more than makes up for that fact.
Something else that makes this a great option is that it features a steel roll cage, so just in case it drops off of a table, it will more than likely be just fine. The high-quality build of this table saw definitely makes it an option worth looking at.
Something else we really like about the DEWALT DW745 is that it has a powerful 1850 watt motor that provides you with more than 3,800 RPM of cutting power, which is more than enough to get through even the toughest of materials.
Even better is that this thing has 610 mm of ripping capacity for cutting large sheet materials to size. This thing also has an excellent long range ripping capacity of 20 inches. Moreover it can cut through boards as thick as 3 – 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees.
If you need a portable table saw that doesn’t sacrifice power or capacity, the DW745 is a model to consider no doubt. What makes this saw even more reliable is that it comes with an overload protection system to make cutting hot, cold, wet, or frozen woods quick and simple.
Another thing that makes this table saw a good choice is the rack and pinion telescopic fence. Not only does this fencing system allow you to accurately feed workpieces through the blade, but it also extends outwards to give you extra cutting room and a whole lot of support for larger pieces.
Even better is that when you are done with the fence, you can retract it to form a compact package which is ideal regarding portability. Both the fence system as well as the miter gauge on this table saw can be easily locked down and adjusted for total accuracy, plus the quick bevel lock with a large scale makes making adjustments simpler than ever.
We also like the fact that this thing comes with a built in dust port so you can connect a sawdust collection system to reduce mess. Another valuable feature is the guarding system to protect your fingers, a guard which can be easily adjusted for position without the use of tools for various applications.
Yet another cool feature is the specially coated table that allows for smooth movement so your work pieces feed into the blade with a soft consistency.
Our Top 3 Table Saw Extensions
A good portable table saw is one that will minimize the need for you to do a lot of heavy lifting and one that will let you move it from one spot to another with as little effort as possible. There are quite a few advantages to having a portable table saw, and of course limited weight is just one of those benefits, as well as a lower price range, among other things.
A portable table saw, as opposed to a stationary one, can deliver a whole lot of power and still get the job done. The trick is finding the right model of table saw which is a good compromise of power, durability, versatility, and portability. We would obviously recommend our number one pick, but any of the runner ups also make for good choices.
People who place a lot of emphasis on being able to complete a wide range of different woodworking projects are going to want table saws that can handle many different varieties of wood. Others just want table saws that are going to work and that are not going to present problems. Portability is an important characteristic in a table saw and it is a deciding factor for many people.
Getting a portable table saw sometimes means getting a table saw that is smaller and doesn’t have a large enough work area. However, it is possible to get a table saw that is portable yet still provides people the performance that they really want and need. The Delta Power Tools 36-6020 10″ Portable Table Saw with Stand can deliver a good performance even as a lightweight and portable device.
Some people might want to get professional assistance when putting together the Delta Power Tools 36-6020 10″ Portable Table Saw with Stand in the beginning which could save a lot of time and irritation. However, after that, this is a device that should allow most people to complete woodworking projects in a fun and easy manner.
Cleanup is easier with the Delta Power Tools 36-6020 10″ Portable Table Saw with Stand than it is with many other tools. The fact that the Delta Power Tools 36-6020 10″ Portable Table Saw with Stand isn’t all that special might bother some customers, many of whom are going to want devices that are exceptional in some way.
However, the Delta Power Tools 36-6020 10″ Portable Table Saw with Stand gets the job done, which is more important.
There are many alternatives to the Delta Power Tools 36-6020 10″ Portable Table Saw with Stand since it is not the most remarkable device on the market. People will be able to find many table saws that deliver a similar performance and may have additional features.
It’s possible to make accurate cuts with the Delta Power Tools 36-6020 10″ Portable Table Saw with Stand, but this is the case with many saws and many of them are going to be more notable for being easy to use and effective.
People who are interested in more advanced and complicated woodworking projects might need to consider table saws that will make it easier for them to work with tough wood and create a wide range of different cuts.
The Delta Power Tools 36-6020 10″ Portable Table Saw with Stand is a good device, even if it is not the best device on the market and even if it is not the top in its own niche. Some devices do not have many obvious flaws but don’t have a lot of obvious benefits that truly set them apart either.
The Delta Power Tools 36-6020 10″ Portable Table Saw with Stand works well, it won’t make a mess, it will last for a long time and it provides a good performance. This is a tool that will serve the interests of many different woodworkers which is more than people can say for many products.
From a leader in the field of construction comes their very own worksite table saw, the Bosch 4100-09 10-Inch Worksite Table Saw. If you want a mobile table saw that you can bring anywhere and still gives the best results, you need to check out this Bosch model because it can really deliver.
This Bosch equipment boasts of several features that make using this item memorable and exciting. Bosch has installed all the imaginable features one may think of when it comes to compact table saws, guaranteeing the best results every time. Here are some features of this great product:
Customers’ thoughts are divided when it comes to the quality and features of this table saw. According to some customers, the blade included in this table saw is not of good quality and makes it very hard to cut with. Customers also complain about the quality of the table top and say that it has only cosmetic varnish and is made of low quality materials.
The miter gauge is another major concern because it does not fit properly and is not very accurate. Some also mentioned that it is very hard to lock the blade height for specific cutting and that the blade’s height may change as you cut which is a dangerous situation while doing partial cuts. It is very difficult to keep up with the dust that can accumulate while using this table saw even if you use a Shop-Vac to clean your workplace.
Some even complained about the blade tilt adjustment mechanism installed in this table saw as it does not go to a specific angle despite adjusting it with a helper. Storage is also a negative aspect of this table saw for some users because it is located in the back of the saw and is very hard to reach. The motor is hard to work with too.
On the other hand, some of the customers highlighted that this table saw is worth your money. They commented that the factory settings are perfect and it is ready for use once you set up the saw. The magnifying glass included in the fence can assist while making subtle adjustments. Some customers noted that the blade included in the table saw is good for cutting plywood and pine.
The built-in blade also works for hard wood but it may take a while for you to cut and it’s not very smooth. The main deck is stable and is made of high quality, lightweight aluminum. Users say the whole framework enables the saw to become lightweight for use.
The motor is also very powerful and enables users to cut in any type of shape they may think of. Customers love the fact that the stand that comes with this table saw is easy to use and assemble.
Those users who have to work with longer pieces say they love it as it makes their work easier. Some users love the fact that this table saw has onboard wrench and blade storage as it makes working with this table saw easier.
Users also comment that unlike other saws, this saw does not make a lot of noise while you are using it. This table saw is also good because you don’t need to modify your circuit breakers to use it.
Just like DEWALT, Bosch is a known name in the field of construction and many recommend that their products are world-class and worth every penny. For their table saws, the company really delivers with the 4100-09 Table Saw. If you are willing to spend money on a good table saw, you will not be disappointed as the catchphrase of the ad for this item goes, precision never compromises.
With the emergence of many DIYers, it is not a surprise that new types of table saws are being designed. There are basically two categories of table saws – portable and stationary. Although stationary table saws are more popular, the portable ones are great options for those who are entering the world of DIY woodworking.
Portable table saws are designed to be, well, portable. They tend to be smaller and lighter. However, this does not affect their performance and durability. One of the most popular portable jobsite table saws is the Bosch GTS1031 10-inch Portable Jobsite Table Saw. This table saw is designed for portability but still features robust components and can produce accurate results.
The Bosch GTS1031 10-inch Portable Jobsite Table Saw is compact in design and can be stored neatly on its sides. It has a balanced one-handed carry handle, making it easy to carry from one jobsite to the next. It has comfortable handles at the top of the saw, on both sides of the table saw, for easy lifting when on-site or if there’s a need to move it. It is a lot more robust and rugged in its construction compared to other portable table saws available on the market today. The all-steel frame makes it a very sturdy table saw. It has a large paddle-switch that makes it easy to turn on and off.
It has several safety features including the riving knife, guard slips and anti-kickback pawl. These added features are easy to use, snap and lock on. Both the guard slips and anti-kickback pawl are stored and hidden nicely underneath the saw. When needed, you can just snap both in place without much fuss. The saw bevels past 0 and 45 degrees, which is quite handy.
The 10-inch blade is sturdy and can cut pretty well making cross cuts, rips and cutting easily. With a 15 amp motor, this table saw has plenty of power, allowing you to work on thicker wood pieces than expected from a portable table saw. This portable table saw has extensions that can allow up to an 18 inch cut. It pulls out in seconds, allowing extra room for your wood piece.
The Bosch GTS1031 10-inch Portable Jobsite Table Saw’s whole base is protected by a roll-bar cage for better protection. The on-tool storage underneath the table is an added bonus which stores all its accessories. The rip fence is stored upside down underneath the table saw for better space management. It also makes it quite accessible when it is time to use it.
A few that have reviewed this table saw found that the arbor wobbles, causing the blade to also have the tendency to wobble. It is especially noticeable during startup. The blade cuts very aggressively and roughly. It also leaves the edges a bit rough and with some saw marks, which can mean extra work when cleaning up the wood piece.
They also noted that the miter gauge slide is only at 6 inches, which can be too short for making stable cross cuts. Any stock over this, the slide will be too far back. Locking and unlocking the bevel lever to 45 degrees takes a little bit of work as well.
Some have also found that the Bosch GTS1031 10-inch Portable Jobsite Table Saw is quite loud. It may be suitable for outside work but it can get really loud when used inside. Although this table saw does have a dust port on the blade housing, it does not perform as well as expected. They mentioned that, realistically, it can catch only up to 50% of the dust, especially if it does not have a vacuum hooked up to it.
If you are looking for a table saw that you can easily use, then the Bosch GTS1031 10-inch Portable Jobsite Table Saw is a good option. Although there are a few issues with this table saw, overall, its many good features like easy adjustment, quick set-up, portability, and solid performance, which balances it out.
It has been said that a table saw is the beating heart of any wood workshop. Over the last few years, more and more table saws have emerged, allowing DIYers and professionals alike to have more options when it comes to choosing one that will be a fit for their needs and wants. This has allowed more affordable options for buyers.
Nowadays, you can get good-quality table saws without the big bucks that come with it. The Craftsman Evolv Table Saw is one of those inexpensive table saws that give you the performance of a good saw without having to break the bank. It is designed for durability and precision.
The Craftsman Evolv Table Saw has a sheer table top for smoother cuts and glide. It comes mounted on a wheeled cart, making it easy to move around. It also has on-board storage for all its different accessories so you do not have to worry about storing them separately and making cleanup easy as well.
With extensions on both sides and extendable support on the back for the outfeed, this table saw provides extra working space without the need for another work table. It comes with a stand and the accessories that are included are quite easy to use and remove as well for easy maintenance.
This table saw is light enough for it be moved around easily but sturdy enough when in use. The saw is not loud so you do not have to deal with loud noises when working with this saw. The included stand is stable enough to get the job done well.
Probably one of the most unique features of the Craftsman Evolv Table Saw is that it has a 24-inch rip capacity on both sides of the blade.
There is not much effort needed to change the blades as it is simple and easy to do. The blade guards form a thin rectangle that can then be used to line up a cut.
With a 15 amp motor that runs at 5,000 RPM, this table saw runs faster than most products available on the market today. With this motor’s horsepower, this table saw can cut through wood pieces that are 3 inches thick or more, allowing you to work on thicker wood pieces.
It does not have any stalling issues when cutting through dense pieces. The addition of laser for aligning a workpiece is a nifty addition as well.
Although the Craftsman 10 inch Evolv Table Saw has extensions on both sides, it is still not as large as some of the other table saws available on the market today. A few people who have reviewed this product have found that the table is too lightweight, so it jumps every time it is turned on. Because of this, cross-cutting with the miter gauge poses some difficulty as the workpiece can move a little to the left or right. They also noticed that the fence can be difficult to close square to the blade.
Some also noticed that the plate around the table sits a few centimeters below the surface of the table so when ripping a thinner wood piece, it gets caught passing the blade, which can be safety issue. The miter gauge is also a little wobbly and the bevel gauge indicator is not as accurate and set to zero as you would expect.
The locking of the blade tilt also seems to slip a bit. They also noted that the table saw is not slotted so sawdust can drop through, making clean up a little bit more difficult to do.
The Craftsman Evolv Table Saw is powerful tool for its price range. It is nicely-designed with its own stand, is lightweight for easy movement and storage but sturdy enough to get the job done.
Although it may not be suitable for a master craftsman or a professional, it is, however, perfect for the weekend craftsman. If you are looking for a durable table saw that does the job without the price tag then the Craftsman Evolv 10 inch Table Saw is a good option.
Want to buy your own DEWALT Table Saw that is cheap, mobile and can do any cutwork you may have despite its size? Well, you may want to look at DEWALT’s DW745 10-Inch Compact Job-Site Table Saw with 20-inch Max Rip Capacity with 120 Volt motor. Although it is small, it packs a punch!
DEWALT is a leader in making quality construction equipment in the market today, and for those who wish to have their own DEWALT in their workstations for woodwork, this DW745 is a good table saw to consider. For a very low price, this table saw can give you everything you need in a table saw. Here are some of the notable features of this compact table saw:
There are some customers who argued that this DEWALT is not worth their money because of several problems. One complained that you cannot easily get this table saw replaced or repaired because of the poor customer service of the company. Even if it is brought to a local service center, it takes a long time to procure parts making it hard to get it repaired.
Some customers commented that the miter gauge is not accurate and they had to buy their own miter gauge. Some also commented that the cuts made with this table saw are not accurate and it is very difficult to achieve smooth cuts.
Some argue that the inaccuracy can also be seen in the rip fence, table surface, and the blade tilt. The stock blade is not good for smooth tasks. Some commented on the noise it makes and said it is bad for the ears and blade problems may also occur because of the adjustments.
They also cited that the factory settings of this table saw are not workable and it is very difficult to adjust it to proper settings. This saw cannot accommodate dado blades and it is hard to cut plywood with it. It also does not fit well in the stand that you purchase separately.
Customers report that even if they use a separate table saw stand, the bolts become loose. Some users complain that it is very loud while cutting.
On the other hand, some customers have expressed nothing but praise for this table saw. They stressed that their table saw is good right from the first time it is set up. It is very easy to use and even professional woodworkers love this saw.
Some said that the fence included in this saw is very good because it allows more efficiency when it comes to cutting. Some users loved this table saw because it is very compact and can be brought anywhere. Storage is also easier with this DEWALT product.
The motor is very powerful and allows users to rip anything using this table saw.
Each cut is done accurately, and it is very easy to unload and load. Some users stressed that the saw can be very durable.
Customers are always happy when it comes to the products made by DEWALT because their items are top-notch and many love how their products can withstand any type of conditions for a long time. If you get DEWALT DWE745 for your home, it is guaranteed that your money will not be wasted.
Are you after a table saw that can stand on its own, cuts similar to the conventional saw but is cheap and good for the home? Well, look no further because DEWALT has introduced such a product and it is the DWE7491RS 10-Inch Jobsite Table Saw.
If you want a table saw that can stand on its feet and can be carried everywhere, then this DEWALT this product is good for you. Not only can you move it around, but also you get quality results without worrying about stability and dust extraction. Here are some of the features that are boasted by the DWE7491RS Jobsite Table Saw:
Like any product, there are some pros and cons in purchasing this saw as told by customers who have bought this table saw for their own use. Many customers argued that its miter gauge is not made of good quality and easily slips off its place, making it hard to keep up with the blade angle.
Some commented that the table itself is not flat, making it hard to work with and causing some inaccurate cuts for their woodwork. Other customers point out that some of the components come already damaged.
The table finishing is very poor and some even came with scratches. Customers also stressed that it is very difficult to adjust the blade and the fence square. The fence is very bad and is not flat for proper work. The instructions manual is vague about attaching the parts properly.
Other customers argued that this DEWALT is nothing like the other DEWALT products available in the market because it is not stable and capable of doing high quality tasks like other products. They also commented that getting a replacement is not a good idea because the customer service is bad and replacements are not always guaranteed.
On the other hand, some customers argue that this product actually can compete with its brothers despite its price. It is very easy to assemble and there is a separate owner’s manual about how you can assemble the entire unit. They also say that you are given notes as to which items you need to have for the installation of this table saw.
Once it is fully installed, the stand becomes stable and ensures that when you work, the table saw does not move a lot. This table saw is mobile too because of the wheels that don’t easily get flattened.
Customers also liked this saw because it is very flexible and you can adjust it to whatever setting you may want. You can use it on top of your table or use it with its stand. According to some users, the add-ons are also very good, including the rack and pinion fence that allows easier cutting.
The onboard storage included in the table saw was also commended by users because it allows them to exchange blades when needed and store their tools.
All the safety features are included in the package and you need not worry about storing them because there are areas where you can store these items when they’re not in use.
Customers also commended the motor of this table saw because it is very powerful despite its small size.
DEWALT is a certified name in the field of construction and many top agencies use their products since it was established. Getting the DWE7491RS Jobsite Table Saw with its extra features is an investment that you do not want to miss because it will make your cuts like a professional woodworker.
Any respectable woodworker can tell you that a good, durable table saw is the heartbeat of any workspace. If used right, it can be such a versatile tool. Now, there are tons of table saws available on the market today and it can be quite daunting to determine which one will give you what you want and need. When choosing one, it is all about what you want in it and what you need it to do.
You can opt for a high-investment cabinet table saw or the more popular contractor saw. However, many want something a little bit more compact that still has the durability to do what it needs to do. There are now portable table saws that you can carry around from jobsite to jobsite or those with their own stand.
One of these is the Genesis 10-inch Table Saw with Stand. It is a 10-inch table saw that comes with a stand made with 24 inches by 20 inches die-cast aluminum featuring an oversized sliding miter gauge.
The first thing that stands out about the Genesis 10-inch Table Saw with Stand is how solid and well-built it looks. The 15 amp motor gives you all the power you will want in a saw, allowing you to rip through hardwood and thick wood pieces with ease. With a maximum of 4,800 rpm, you can quickly and efficiently make accurate and smooth cuts in your wood pieces. This also allows you to get quite precise cuts with your wood pieces.
The 10-inch blade is a good all-purpose blade that does the job of cutting wood well. The blade angle adjustment also works well and is quite accurate. It has a self-aligning rip fence which automatically locks in the place the front and rear, helping you to make more accurate cuts.
One of the cool features of this table saw is its rocker switch. It is easy to control with a quick shut-off cover as well as an overload shut-off protection with a reset switch for some added safety features. This feature can minimize any accidents in the event that your table saw starts to overload.
The 24” x 20” die-cast aluminum table is spacious enough to work on sizable large wood pieces without much difficulty. The stand that comes with it is easy to put together and holds the saw very well.
The Genesis 10-inch Table Saw with Stand also comes with a dust collection port so you do not have to deal with unnecessary residue while working.
Although it has a powerful motor that can cut through hardwood, the noise it creates can be a little disturbing. You may need to wear ear protection when in use. A few people who have reviewed the Genesis 10-inch Table Saw with Stand also found some concerns with its the blade control handle.
Some have found that the table top is about average as compared to other table saws available on the market today.
Others who have used this product were a bit disappointed with the quality of the table as they found that it is not on par with table saws of the same level. They also mentioned that the quality of the splitter, miter gauge and blade guard was a let down compared to those seen with other table saws.
If you are looking for a table saw that is designed to be easy and safe to operate then the Genesis 10-inch Table Saw with Stand is a good option. It is a well-built table saw that should be a good fit for any DIYer. It may not be a choice for every professional but it does the job.
Although the noise the motor creates can be too loud, its performance more than makes up for it. Ultimately, the Genesis 10-inch Table Saw with Stand does what it needs to do without you spending a lot of money.
Table saws come in different types and styles. If you want a professional table saw for your home that cuts efficiently, you can take a look at Sawstop’s CNS175-TGP36 1-3/4 HP Contractor Saw. Cut and rip your woodwork like a pro with this one-of-a-kind contractor saw in the comfort of your own home.
This product of Sawstop is very good when it comes to precision and quality because it offers all the features you might want in a regular bulky contractor saw. This table saw is also very good for you if you work with long pieces. Here are some of the features of this contractor saw:
Customers were divided when it comes to the capability of this contractor saw. One customer stated that cutting surfaced lumber triggers the saw’s circuit boards to overheat and shut down. Another customer commented that changing bevel and height gears are often disabled because of the clogged dust in these areas.
Assembly time is also very long especially if you wish to change the blade of the machine for different cutting styles. One customer said that this saw does not work well with barnwood or any wood block that is damp, as the machine either malfunctions or stops. One user said anything that generates current would not be cut by this machine.
Troubleshooting is also very difficult with this product. Customers indicated that even if Sawstop sends a replacement for any broken part, it does not work and the situation even gets worse.
On the other hand, there are customers who stress that Sawstop’s Contractor Saw is a brilliant investment and people should have it in their workshops. Some users say that assembling this saw is actually quite easy because it comes with clear instructions and color-coded flowcharts about where each part goes.
Once it is fully assembled, users say that it runs quickly and quietly when turned on. Cutting with this saw is also very quiet. Its mobile base is commendable and stability is very good too. Users love the safety features of this table saw, which ensure that you do not get into accidents while using the saw. It also has storage area that you can use to store its riving blade, miter gauge and other critical things you may need when you use this saw.
The quality of the saw and its cuts is very good because it is not often interrupted. The table base is excellent as well. The precision of the cuts is something customers like very much. Some users commented that the customer service of Sawstop is top-notch and the staff handling these inquiries know the details of each item and provide all the assistance needed by customers.
These customer service representatives even help in indicating which parts you may need for your saw to get the best out of it. Customers also love this saw because it is cheaper than other contractor saws available in the market.
Although Sawstop is not a familiar name, they do make quality equipment that you can use for construction and DIY projects. Their Contractor Saw helps any user cut all types of wood like a pro.
Looking for a cheap table saw for your workshop that can cut any surface? You can take a look at the SKIL 3410-02 10-inch Table Saw, which you can bring anywhere and cut anything you can think of without causing problems with accuracy and stability.
Although it is very cheap and small, this table saw can give you what you need. It competes well with other brands on the market. It promises great efficiency and power for any type of wood application that you may need to use this saw for. For those in need of a good table saw, here are the features of this SKIL product:
Customers that have purchased this have different opinions about the quality of this table saw from SKIL. According to some customers, the quality of the parts of this table saw is not very good and it affects the quality of its cuts. The design is very complicated, preventing customers using other items to help them cut their woodwork. Some also complained about the flimsy miter gauge because it is not accurate and its slots are not up to the mark.
The blade wobbles consistently making it difficult to adjust it properly for good performance. They commented that with its default blade, the saw is unable to cut through any wood that produces grain.
The self-aligning fence does not fit very well and and it takes a while to adjust the fence. It is also difficult to locate parts for this table saw and sometimes you would have to manually purchase parts that you need as replacements e.g. a dado insert.
The runners of the saw are not the standard runners, which prevents users from purchasing featherboards or cross cut sleds. The extenders do not work properly and they are raised, which impairs users’ ability to properly sort out their work pieces. The cuts are not precise and adjustment assembly is not accurate or stable.
On the other hand, many customers stressed that this table saw is very good for home workstations and even for construction areas. The first thing that they admired about this product is the price. They liked the fact that even though it is cheap, it can saw similar to the top brands without many problems.
According to some customers, this saw is good for DIY projects and for homeowners who wish to have a reliable table saw for their simple woodwork. They also commended the easy adjustment and set up features of this table saw.
They said that it is very easy to customize the features of this table saw and they sorted out the mini glitches other users complained about. The saw is also very stable and cuts any type of wood efficiently. The stand is good and is easy to fold when you are not using it.
Customers stress that the motor is also very good for hardwood and it doesn’t lag while cutting these types of wood. Some users praised the table saw for the table extension, which allows them to work with longer wood pieces.
Although it is not as well known as DEWALT and Bosch, SKIL is carving its name in the industry because of its quality tools and machinery. If you are looking to give a table saw to your family or friends who wish to venture into woodworking, it is best to check out SKIL’s table saw. It is cheap but it can cut like a pro.